Simpson Strongtie Adjustable JHA Joist Hanger Jiffy Speedy Hangers Various Sizes

£0.59£2.54

Clear

 Simpson Strong-Tie JHA450/150 150mm Long Leg

Joist Hanger For Timber to Timber Pre-galv.

Simpson Strong-Tie

(Manufacturers Part Number: JHA450/150)

Heavy duty long leg joist hanger for timber to timber (JHAs) from Simpson Strong-Tie are one piece non-welded joist hangers for supporting timber joists from timber members. Extended legs alllow for below suppoinstallation in loft conversion applications.

W – 150mm – H – 440mm – B – 63mmm – C – 150mm – Material: 1.5mm Pre-galvanised mild steel
 
 
Simpson Strong-Tie JHA450/47 47mm Long Leg Joist Hanger For Timber to Timber
 

 

  • JHA’S are a one piece, Non-Welded Joist Hanger. Suitable for supporting timber joists from timber members.
 
  • A galvanised joist hanger that provides great support with ease of installation.
  • • Published performance values are based upon 3.75mm x 30mm square twist nailsbeing used throughout.
  • •Wider strap provides more surface area on the supporting timber andallowsincreased nail spacing, enhancing the performance of the criticalhanger -to -supportpart of the connection.
  • • Minimum and maximumnailing schedules are stamped into the strap providingcorrectinstallation information for site operatives.
  • • Speed -prong holdsthe hanger in position to allow easier attachment. The installernolonger has to try to hold hanger, joist and nail with one hand and swingahammer with the other!
  • • JHA270 range features a location tab which allows easier alignment of the hanger.
  • • The model number and size is stamped into the seat of the hanger for easyidentification, even after installation.
  • •Regularised Timber: we have added new sizes to our JHA range to suitregularisedtimber. Use 47mm or 91mm width hangers for this newapplication.
 
  • Material:
  • JHA270—0.9mm pre -galvanised mild steel.JHA450—1.5mm pre -galvanised mild steel.
 
  • Installation:
  • o    Alternative installation methods are available depending on the availability of nailing surface.
  • o    Maximum Nailing: All nails must be applied according to the table.
  • o    Minimum Nailing: For a lower installed cost the minimum nailing schedule can beused when the maximum nailing load capacity is not needed.
  • o    A minimum wrap over of 45mm is required.
 
  • Loft Conversions (JHA450 Range): Forapplications where the hanger extends below the support. Install top,face, and joist nails according to the table. A minimum wrap over of45mm is required or maximum nailing.

Simpson Strong-Tie JHA270/91 91mm Jiffy Joist – Hanger For Timber to Timber Pre-galvanised – Simpson Strong-Tie

(Manufacturers Part Number: JHA270/91)

Jiffy joist hanger for timber to timber (JHAs) from Simpson Strong-Tie are one piece non-welded joist hangers for supporting timber joists from timber members. Suitable for timber height of up to 200mm as a wrap over hanger and upto 250mm as a face fix hanger.

W – 91mm – H – 234mm – B – 50mm – C – 100mm – Material:0.9mm Pre-galvanised mild steel
 
 

Simpson Strong-Tie JHA270/47 47mm Jiffy Joist

Hanger For Timber to Timber Pre-galvanised

Simpson Strong-Tie

Jiffy joist hanger for timber to timber (JHAs) from Simpson Strong-Tie are one piece non-welded joist hangers for supporting timber joists from timber members. Suitable for timber height of up to 200mm as a wrap over hanger and up to 250mm as a face fix hanger.

W – 47mm – H – 238mm – B – 50mm – C – 103mm – Material: 0.9mm Pre-galvanised mild steel
 
Simpson Strong-Tie JHA270/75 75mm Jiffy Joist

Hanger For Timber to Timber Pre-galvanised

(Manufacturers Part Number: JHA270/75)

Jiffy joist hanger for timber to timber (JHAs) from Simpson Strong-Tie are one piece non-welded joist hangers for supporting timber joists from timber members. Suitable for timber height of up to 200mm as a wrap over hanger and upto 250mm as a face fix hanger.

W – 75mm – H – 243mm – B – 50mm – C – 108mm – Material: 0.9mm Pre-galvanised mild steel

 

Brand

Simpson Strong-Tie

© 2021 - Technology Spare Parts Ltd - Company registration No. 1098394 VAT No. GB 294 0382 93
Registered in England and Wales - All rights reserved.
0